802.11n Wireless CardBus
10
c. 802.1X
1.
Authentication Type:
The type selected here must be identical to the type of the
802.1x authentication type you’re using.
2.
Session Resumption:
Enable or Disable.
3.
Domain Name:
Input the domain name of 802.1x authentication. This field will be
grayed out when authentication type is not
EAP-FAST
.
4.
Use Client:
If the authentication type is using
PEAP
or
TTLS
, you can use the
certificate stored on your computer. If the authentication type is using
TLS/Smart
Card
, this box is always checked.
5.
Allow unauthenticated provision mode:
This box is always checked and can not
be modified.
6.
Use protected authentication credential:
If the authentication type is using
EAP-FAST
, you can use protected authentication credential by check this box.
7.
Remove:
Remove the credential you imported previously.
8.
Import:
Import the authentication credential file (PAC or al file format), you’ll be
prompted to select a credential file from your computer.
9.
Protocol:
Select the protocol of tunneled authentication. This pull-down menu is
only available when authentication type is using
PEAP
or
TTLS
. When using
EAP-FAST
as authentication type, the protocol setting is always
Generic Token
Card
and can not be changed.
10.
Password Mode:
Select the password mode of
EAP-FAST
authentication mode.
This setting is hidden when the authentication type is not
EAP-FAST
.
All manuals and user guides at all-guides.com
