User’s
Manual
6
It will continue to power the unit for about 1 hour after the “low battery” warning message and, in
extreme cases, it can be charged even when the unit is in-use during a lesson.
Ordinarily we recommend to charge the battery when not connected to the Saver One T.
In case of long disuse period, we recommend to charge the battery at least once every 45 days in order to
optimize its capability.
Minimum number of charge cycles guaranteed: 300.
Do not use or store in environmental conditions different from the given range
Keep the battery away from heat and direct sunlight
Do not store in places with dangerous concentration of flame gas or anesthetics
Do not shock, cut, break or open the battery
Keep the battery away from children
If liquids came out from the battery and get in touch with eyes, wash them carefully with
clean fresh water and consult immediately a doctor
Dispose of exhaust batteries in respect with local laws
CHARGER
The Saver One T is equipped with the SMART CHARGER (H01440010-XX-D1 Ni-MH/Ni-Cd) able to
charge the battery. No other kind of charger is allowed to be used for charging the battery.
Technical Specifications:
-Input Voltage from AC source: 100~240Vac, 50~60Hz, 30W
-Output Voltage cigar jack: 2.4-14.4Vdc, 1000mA
-Ambient operation temperature: 0°C to +40°C
-Overvoltage and short circuit protections
-Safety: CE compliant
-LED Indicator: 1 bi-colored (red/green)
Charging LED Control:
Red and Green LED flashing for 2 times after connected
to AC source, then both LED off
Red LED on charging
Green LED on full charge
Red LED flashing on error status
To grant the perfect functionality and performance of batteries, here few recommendations for a good
charging process:
Before starting the charging process, be sure the charger or the battery are not overheated. Otherwise,
wait for a few minutes so that both items reach room temperature which is the only condition to start
