User’s
Manual
5
UNIT CONTROL LEDs
: flashing
red
or
green
fixed
red
STAND-BY
(with battery connected)
Unit ready for use.
Warning indicator for the low battery real-status.
The battery needs to be charged.
+
OPERATING
Unit operating.
Lights OFF
Event simulation for a faulty unit.
Warning indicator for the low battery real-status along with
the voice message: “
low battery
”.
The battery needs to be charged.
Maintenance
After turning off the unit, make sure to pull out the pads connector from the unit.
Keep the unit clean. If the unit is dirty, use a soft damp cloth with water or neutral
detergent to wipe softly. If necessary, clean or sterilize it with a cloth soaked in
medical alcohol (75% maximum concentration). Do not clean it with other volatile
material. Use only damp non-abrasive cloth for cleaning.
Do not let liquid such as water flow into the unit.
POWER SUPPLY
The Saver One T is equipped with a Ni-MH Rechargeable Battery (12V@2Ah).
A long-lasting battery able to power the Saver One T in continuous operating for around 20 hours or 30
days in stand-by mode.
Do not use or store in environmental conditions different from the given range
Keep the unit away from heat and direct sunlight
Do not store in places submitted to strong temperature variations and heavy vibrations
Do not store in places with dangerous concentration of flame gas or anesthetics
Do not store in places submitted to high concentration of powder
Do not cut or break or open the unit
Dispose of the unit in respect with local laws
DC connector
to link up the
charger’s cigar-jack
