Operating Instructions
18
/
44
6
Operating Instructions
6.1
Powering On the Vein Illuminator
After installing the vein illuminator, power on the vein
illuminator according to the following steps:
1. Press the power button to power on the device. The running
indicator is illuminated, and the device starts to project 6s later.
2. Check the accuracy of the device according to section 5.4. After
that, the device can be used to observe the superficial veins.
During actual use, the user can adjust the projection distance until
the English letters at both sides of the projection image achieve
the optimal effect (or become the clearest).
6.2
Setting the Mode
The vein illuminator is suitable for the users with different
visual feelings. A user can press the mode button to set the mode.
Seven modes are available for selection: basic mode, green light
mode, red light mode, blue light mode, light purple mode, depth
mode, and inverse color mode. In any mode except depth mode, a
user can press and hold the mode button and then release to switch to
the inverse color mode of the current mode. In inverse color mode,
the vein color and skin color in the projection image are inversed.
In depth mode, align the long side of the red cross in the middle
of the projection with the vein to be detected. Then, you can observe
that the green indicator is illuminated to indicate the vein depth
information.
Summary of Contents for MEDCAPTAIN NAVI-30
Page 50: ......
