Zonair3D PURE AIRBOX, User Manual

Page: 9 / 44

9 Pure Airbox
Start-up
CONNECTION OF PURE AIRBOX
Before connecting the equipment, check that no component is missing.
SWITCHING OFF PURE AIRBOX
After use, switch the Pure Airbox regulator to off and disconnect from the power
supply.
Position the equipment in a clean and dry space.
1. Before connection, place the
GRSystem filter inside the Pure
Airbox.
The filter is packed separately.
(Follow the instructions provided
with the filter or pages 10 & 11 of
this manual).
2. Locate a power supply for
connection to the Pure Airbox.
3. Plug the equipment to the
power supply using the power
cord of the Pure Airbox and
switch on the equipment by
pressing the blue switch.
4. Position the regulator to
position 5 to check its normal
operation.
5. Once having checked that it
is operating properly, position
the regulator to its maximum
speed for ten minutes for a deep
cleaning of the room.
6. Then, position the regulator
between position 3 and 4 for an
optimal ventilation and comfort
speed.