Pure Air Residential is a high-quality product that has been manufactured in strict
compliance with recognized technical regulations safety, and in accordance with EC
standards.
Read this instruction booklet carefully, since it contains important information for
your safety during the installation, use and maintenance of this product.
We ask that you make sure the equipment is in perfect condition when you unpack
it, since any existing defect is covered by the manufacturer warranty.
1. SAFETY STANDARDS AND “EC” MARKS
The standards and recommendations indicated below reflect current standards in the
field of safety, and therefore are based primarily on meeting standards of a general
nature.
Consequently, we recommend that all personnel exposed to risks adhere strictly to
local regulations in force regarding hazard prevention.
ZONAIR3D is in no responsible for any damage or injury caused to persons or
objects resulting from failure to comply with safety standards, and any possible
modifications to the product. The EC seal and statement of conformity serve as a
proof of the product’s compliance with applicable European Community standards.
ZONAIR3D engineers are firmly comitted to research and development to achieve
products with improved efficiency that complies with current safety standards.
2. GENERAL STANDARDS
·
Product risks have been analysed pursuant to the provisions of the Machinery
Directive. This manual contains information intended for all personnel exposed to
hazards, with the goal of preventing personal injuries or damage to objects resulting
from mishandling or improper maintenance.
·
All maintenance service work (corrective and preventive) must be performed with
the equipment stopped and disconnected.
·
Before connecting the power cable to the motors, make sure that the voltage on
the line matches the voltage indicated on the unit’s identification plate.
