Zonair3D AIR+ 50, User Manual

Page: 24 / 52

24 Air+ 50
1. Place and center the absolute filter in its position, with the plastic perimeter
seal facing the inside of the device and fully tighten the 6 bolts of the air outlet
panel.
2. Install the GRSystem filter sliding it to the end.
3. Install the prefilter sliding it to the end.
Please contact Zonair3D
TM
or your local distributor for spare parts.
IMPORTANT: It is important to only use original filters supplied by Zonair3D
TM
,
in order to ensure the desired results and the proper operation of the unit. If
you use filters that are not supplied by the manufacturer, this will void the unit’s
warranty.
INSTRUCTIONS FOR INSTALLING THE FILTERS AND CLOSING THE PURIFIER
MANAGING USED FILTERS
The filters of this unit should be taken to your local recycling point for correct
disposal, so that they can be managed sustainably and to prevent any harm
to the environment.
RECYCLING HOUSEHOLD APPLIANCES
European Directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE) specifies that household appliances should not be recycled with other
municipal waste.
The symbol of the crossed-out dustbin reminds you of your obligation
to dispose of this product correctly.
For detailed information on the most suitable way to dispose of household
appliances, consumers should contact their local authorities.