50036-1 | Zona Plus
TM
Series 2 - User’s Guide | Page 15 | ©2012-2013
Problem: The device turns off before you have finished
the entire isometric therapy sequence.
•
Be sure to pay attention to instructions displayed on the
Zona Plus screen. The device will turn itself off to conserve
the battery if it has not been used within 60 seconds from
the beginning of a therapy step.
•
Make sure the battery is properly installed. Set the bottom
of the Zona Plus against a tabletop. Press or rock the
battery cylinder against the table (you may hear a click).
•
Try restarting the therapy session.
•
Replace the battery if the device still shuts off.
•
If you are unable to resolve the issue, please contact Zona
Health.
Problem: You are not achieving a score of at least 80.
•
The score is a measure of your ability to squeeze at the
target level (
“HOLD”
) for the required amount of time.
•
The force sensor on the Zona Plus can detect even small
changes in the squeeze force. If your scores are below 80,
even though you are staying within the “HOLD” zone for
much of the isometric therapy session, try squeezing a bit
harder. As long as the display shows “HOLD”, it’s better to
squeeze more than less.
Problem: You are having trouble performing the
isometric therapy session.
•
Be patient. Zona Plus should get easier to use with
continued use.
•
Some pain and/or fatigue is normal, but it should fade
quickly after your therapy is complete.
If you experience
e
xcessive fatigue, discomfort, soreness, or pain during
or after the therapy session discontinue use and resume
only as recommended
by your healthcare professional
.
