background image

G U I T A R S

G U I T A R S

3

2

Birth Certificate

Model: 
Serial number:
Date of manufacture:
Color:
Woods:

Core 
Top  

Pickups:
Electronics: 

ZP-2S / ZP-2D / ZP-2DM / ZP-3 / ZP-4 

ZB-2/ ZB-3 / ZB-4.0 / ZB-4.3 / ZB-5 /  ZB-6 / 
ZDP-1 / ZAP-3 / ZAP-1 / Lightwave S2

Final inspection by 

Zon Guitars

780 Second Ave.

Redwood City, CA 94063 USA

Telephone: 650-366-3516

Fax: 650-366-9996

Email: [email protected]

http://www.zonguitars.com

Introduction

Thank you for making your choice a ZON bass. Crafted by artisans with

a passion for building each instrument as if it was their very own, your

bass is the culmination of classic hand-craftsmanship and the best in

contemporary materials. 

The neck and body of your bass were completely crafted in our Redwood

City facility. The import models are carefully scrutinized in our facility to

meet our standards of quality. This meticulous attention to detail, com-

fort and aesthetics is our hallmark, ensuring you a bass with a lifetime

of reliable service and playing enjoyment.

Careful thought has been put into the design and creation of each

model we offer. Each component is selected to work with and comple-

ment the other in order to achieve the distinctive voice prescribed for

that particular model bass. 

Pickups and electronics are designed exclusively for Zon and made to

our specifications from the highest-quality components. The hardware is

machined to precision tolerances in order to facilitate accurate, stable

tuning and micro-fine adjustments.

Hand-selected, premium-grade woods were used in the construction of

your instrument and finished by hand to achieve a lasting beauty. The

fretwork is also dressed by hand, and the instrument thoroughly set-up,

adjusted and tested prior to shipment, ensuring a bass with optimum

playability and performance.

The contents of this Owner’s Guide are filled with valuable information

about your new instrument. Please read it carefully to learn how to care

for your bass and before making any adjustments. If you are uncomfort-

able with any of the procedures contained in this manual, take your

instrument to a qualified repairperson. In the event you should need

special assistance, please contact us at toll free at 1 877 PLAY ZON or

via the web at www.zonguitars.com.

Sincerely,

Joseph M. Zon

President, Zon Guitars

Summary of Contents for Hyperbass






















Reviews: