background image

G U I T A R S

G U I T A R S

23

22

ZB-2

MODELS: Sonus 4/1 & 5/1

Description: 

Hand-assembled components housed in an

electrostatically shielded, epoxy module

Function:   

Master volume, bass and treble boost/cut

Specifications: 

Output level  N/A

Power requirements:

One 9-volt battery

Battery life expectancy:

500 hours continuous use

About the system

Master volume control.

Controls overall volume level. Turning the con-

trol clockwise increases the volume; turning the control counterclock-

wise decreases the volume.

Bass control. 

15dB boost or cut of bass at a center frequency of 50

Hz. Turning the control clockwise boosts the bass; turning the control

counterclockwise cuts the bass. The detent, or “click,” in the center of

the control is the “flat” position, zero boost or cut.

Treble control.

15dB boost or cut of treble at a center frequency of

5kHz. Turning the control clockwise boosts the treble; turning the control

counterclockwise cuts the treble. The detent, or “click,” in the center of

the control is the “flat” position, zero boost or cut.

Trimmer. 

This control on the circuit module attenuates overall output

level. Its factory setting is the mid position. 

Caution: 

Setting gain too high may cause distortion.

Treble (center)

Bass (outer ring)

Master volume

05

9-V

olt Batter

y

Trimmer sets maximum gain

Summary of Contents for Hyperbass






















Reviews: