All content Copyright ©2022 Zombie REC. Specifications are subject to change without notice.
Step 6 – Diodes
There are 8x diodes in total. Start with the 3x 1N4148 diodes. Bend the leads at the tip of the diode
with the black band (cathode) like so (do this for all diodes):
Insert them into D1, D2 and D7. Insert the long lead side without the black band (anode) where the
white ring is on the PCB. The black band side should go into a hole marked with «K». Each diode
should be inside a single «box» that is made up of white corner markings on the PCB (see image
below).
After inserting them. Proceed to secure and solder them the same way we did it with the ceramic
capacitors before. Go back and check out step 2 again if necessary.
