Broadband Wireless Router (AP) User Manual
Routing
IP Dynamic Routing
Routing Information Protocol (RIP) is utilized as a means of exchanging routing information
between routers. It helps the routers to determine optimal routes. This page allows you to
enable/disable this function.
By default, RIP is disabled with Disable selected. You are allowed to enable RIP over the
LAN/WAN interface. Upon each interface, you can customize the RIP on
Receive Mode
and
Transmit Mode
respectively.
Receive Mode
: It incorporates the RIP information when receiving the RIP packets.
Transmit Mode
: It broadcasts the routing table.
RIP Version
: When enabling RIP, you can select the RIP version from
RIPv1
,
RIPv2
or both
(
RIPv1 and RIPv2
).
Disable RIP
: To disable RIP, just select
Disable
from the drop-down list.
30
