7
Hardware/Software
Section 3 - Utilities Software
Audio Plus 6400 3D
3
Utilities Software
It is always a good idea to make backup copy of your original software.
Make a backup copy of your AudioPlus 6400 3D software drivers now
and store your original diskettes in a safe place.
NOTE: In the following paragraphs, Utilities are assumed to be installed
in default Drive:\Path directory, which is C:\CM8330.
3.1 CMINIT
The CMINIT.EXE can change the AudioPlus 6400 3D’s I/O address,
DMA channel, IRQ channel, Game port and MPU-401 MIDI port
without jumper setting.
In main menu, you can use arrow keys to select items that you want to
change. The sub window will display the I/O you can select. If any PCI
or PnP card use this I/O , item will gray to avoiding conflict and display
the PnP card title that use it. In Windows 95, “DOS prompt” or “shut
down to DOS” are still in Windows 95 protected mode, changing I/O by
user are not expected. So program will display current value of all I/O,
called “status” mode. At DOS prompt, type
CMINIT [Enter]
You can see all I/O settings in the main Menu.
WSS Base I/O Address ......... Select WSS mode base I/O address
WSS IRQ Channel ................ Select WSS mode IRQ channel
WSS DMA Channel .............. Select WSS mode DMA channel
Voice I/O Address ................. Select SB mode base I/O address
Voice IRQ Channel ................ Select SB mode IRQ channel
Voice DMA Channel .............. Select SB mode DMA channel
Voice 16bit DMA Channel ...... Select SB mode 16-bit DMA transfer channel
