5
Hardware/Software
Section 2 - Installation of the Audio Plus 6400 3D
Audio Plus 6400 3D
2
Installation of the AudioPlus 6400 3D
2.1 The AudioPlus 6400 3D Jumper Setting Description
Table 2.1 The
AudioPlus 6400 3D
Jumper Setting Description
JPx
Function
Jumper Setting
JP1
Output select
Power Amplifier
Line-out
JP2
Microphone type
open
normal Microphone
short
special Microphone
Attention :
If your sound card doesn‘t have power amplifier built-in,
there is no JP1 jumper to set.
Table 2.2 Connector function
Connector
Function
J1
Connect Wave Table Upgrade Board (optional)
J2
Connect with joystick or MIDI cable
J3
Connect Panasonic CD-ROM Audio output
J4
Connect IDE/Sony CD-ROM Audio output
LINE
Connect with the audio output(line-out) from stereo
MIC
Connect with microphone(mono)
SPK
Output to speaker or audio-in of stereo
