Patient training
ZOLL Lifecor internal use only
Page 3-7
How to demonstrate the arrhythmia alarms
1 With this screen displayed, press
▼
.
The device runs through the alarm sequence that will occur if
an arrhythmia is detected:
y
Vibration alarm activates and response buttons light red.
y
Siren alarm sounds.
y
Display shows that an arrhythmia has been detected and
tells patient to press response buttons.
y
Voice prompts announce to bystanders that that patient is
going to be shocked.
2 Tell the patient to press and hold the response button during
the alarms.
The alarms stop as long as the patient holds the response
buttons.
Tell the patient to release the response buttons to show that
the alarm sequence resumes.
3 To stop the arrhythmia demonstration, press
▼
.
