Chapter 15 Communications
15-2
www.zoll.com
9650-000820-01 Rev. K
The Wireless Icon
The wireless icon is located to the right of the patient mode in the display screen. It has five
possible states shown the table below. If wireless connectivity is disabled, no icon is displayed.
State
Description
Connected
Wireless connectivity is active using Wi-Fi, or USB cellular modem. For
Wi-Fi, this is the normal operating state. For cellular modem, this icon
appears only when a transmission is requested.
Not connected
Wireless connectivity is inactive. If a Wi-Fi access point is selected, this
icon indicates the selected network cannot connect due to incorrect
configuration or weak/no signal strength. If the unit is configured to use
Bluetooth or cellular modem, the unit will show this icon until a
transmission is requested or a peer-to-peer connection becomes active.
Bluetooth Connected
Bluetooth tethering (to a phone) or a Bluetooth peer-to-peer connection
is active.
Failed
Wireless communication hardware has failed.
Ethernet Connected
Replaces the wireless icon when Ethernet is enabled. An adapter is
connected, and the connection is operating.
Ethernet Not
Connected
Replaces the wireless icon when all of the following are true:
•
Ethernet is enabled.
•
Wireless is disabled.
•
An Ethernet adapter is connected but the connection is not active.
No icon
All wireless connectivity is disabled.
