background image

7

6

PARTS NAMES AND FUNCTIONS  

Cont.

Press in the Lid Lock as illustrated.

Press down the Upper Lid.

Pull the Lid Lock up with fingers 

to open the Upper Lid.

To Open

To Close

Press  down  firmly  until  the  both  Lid 

Locks clicks.

If the orange colored line can be seen at the inside or outside of the Lid Lock, it indicates 

the  Upper  Lid  is  not  closed  securely.  If  this  happens,  be  sure  to  press  the  Upper  Lid 

down securely.

Please be sure that the Upper Lid is securely closed.

(Not doing so may cause the hot water to leak and resulting in scalding.)

1

1

2

The orange 

colored line is 

seen at inside.

The orange 

colored line is 

seen at outside.

Be careful not to tip the product over.

When opening and closing the Upper Lid, please be sure to remove the 

Body from the Power Base.

1

2

The first time you use the product or after storing it for a long period of 

time, boil water once and discard it before boiling water for consumption.

Only  use  the  coordinated 

Power  Base  designed  for 

this product.

When mineral water or alkalized ionic water are used, 

a floating residue may develop or a milky white 

substance may form on the surface of the Inner 

Container.This is due to the ingredients in the water 

and is harmless to your health.

When using mineral water or alkalized ionic water, 

please perform cleaning and maintenance frequently.

When using mineral 

  water or alkalized ionic water:

Fill the Inner Container 

with water before 

placing the Body onto 

the Power Base.

Close the Upper Lid securely.

Place the Body onto the 

Power Base. 

1

2

BOIL MODE

How to Open/Close the Upper Lid


Open the Upper Lid and fill the Inner Container 

with water using a pitcher or other container.

The first time 

you use the product you 

may notice the smell of 

plastic. This is normal 

and will gradually fade 

away.

Do not fill the Inner Container directly from a water faucet or 

place the product on a wet surface such as a sink. (Exposing 

the heating element directly to water may cause malfunction.)

Avoid splashing water on the Body and Control Panel. (May 

cause malfunction.)

Do not fill over the Maximum Water Level Line. (Hot water 

may overflow from the Steam Vent or Spout.)

Do not fill the Inner Container with any liquid other than 

water.

Do not use water additives such as charcoal for water 

purification or mineral additives. (Small particles may get 

clogged inside of the product.)

Be sure to close the Upper Lid securely. If the Upper Lid is 

not closed securely, the power will not switch OFF when 

boiling completes.

Do not fill the Inner Container while the Body is connected to 

the Power Base. (Doing so may splash water on the Power 

Base and cause malfunction.)

NOTE

Close the Upper Lid and place the Body on the Power 

Base.

Set  the  Body  on  the  Power  Base 

correctly so that the Connector fits 

in the Receptacle securely.

Press the Upper Lid down securely 

until it clicks.

Otherwise hot water may spill out 

from gaps other than the Spout 

when pouring, resulting in scalds.

Receptacle

Connector

Place the Power 

Base on a clean, 

level and stable 

surface.

NOTE

NOTE

Maximum 

Water Level 

Line

Please be careful with 

the steam coming out 

when opening and 

closing the Upper Lid. 

Do not open the 

Upper Lid while 

boiling or immediately 

after boiling 

completion. Doing so 

may cause scalding.

Summary of Contents for CK-EAQ10









Reviews: