To select and engage a patch, press the corresponding
stompswitch. Press the stompswitch again to bypass that patch.
To change banks, press together either scroll and bypass
(bank up) or scroll and select (bank down). Press any
stompswitch to engage one of its patches, thereby selecting
that bank.
You can select the maximum number of banks to scroll through
in the Config Menu.
USING THE STOMPSWITCHES WITHIN MODULES
All three of these switches can be interfaced
to perform functions using ZOIA’s stompswitch
module. However, since the bypass and
scroll switches have primary functions, they
must be toggled to auxiliary mode to function in
this way. This can be done by holding bypass
and scroll together for one second until the shift button
turns cyan. ZOIA’s stompswitch module will now respond to the
scroll switch (middle) and the bypass switch (right) for
use within the grid. Hold them together again to return them to
normal functionality.
EXTERNAL SWITCHES
You can also connect an external footswitch through the
Control Port. For information on how to set up an external foot-
switch,
see page 30
.
13
