11
© Copyright 2022 Zoeller
®
Co. All rights reserved.
4. Once the Fit’s Z Control
®
LED is solid, log in to your account (or create one) at zcontrolcloud.com. Choose the Add New Device button
next to the location you want to use for the Fit (see Figure D). Follow the directions to add your Fit by either auto-detect or entering the
Device I.D. When successful, a Fit product tile will appear in your account.
Firmware Updates:
The Fit is capable of OTA, or “over the air” firmware updates. It’s possible that the Fit could perform an update immediately if one is available at
the Z Control
®
Cloud. If an update is taking place, the Z Control
®
LED will flicker for up to 1 minute while the update is downloaded. The Z Control
®
LED will be solid and all other LEDs will turn off while the update is being installed. After up to 1 minute, the Fit will restart and return to normal
operation. The Fit’s alert history on the Z Control
®
Cloud will also be updated with the firmware upgrade information, and nofication to email
accounts will occur.
When you add the correct
Device ID, a Fit product tile
will appear in your account
Select Add New Device
Figure D
Congratulations! Your Fit is online. Be sure you have added the contact information for phone numbers and email adresses that should receive
notifications. This can done by selecting "Manage Contacts" from the main menu (the square with 3 lines in the upper right corner). You can also
edit how each device sends out notifications from the device's "Alarm Settings" tab. You can now open the product’s configuration by clicking the
“View” button to modify the Fit’s device and notification settings. You can also install the Z Control
®
mobile app on your mobile device (Android and
iOS versions available, search “Z Control
®
” in the app stores).
