5
Operation Temp.
-20°C to +70°C
5%--95% non-condensing
6.
Installation
6.1 SIM Card Installations
Please make sure the SIM card is for GSM network and able to execute the function of
incoming calls display, no calls can be diverted and the PIN code is locked. The SMS format
must be TXT format, and can’t recognize the PDU format.
6.1.1. Open the back cover, and take out of battery.
6.1.2. Upwards lift metal sheet along to the SD card slot arrow direction and insert the SIM card, then
press the metal sheet to its original position.
6.1.3. Insert in the SIM card according to the direction of graphic
6.2 Operation instructions
Operate the tracker device in an open area out of door, turn
on the battery switch.
ARM by inductive key:
Place the Induction key on the top
of the tracker, indicator will be on. Remove the key after 3
seconds. LED indicator flashes one time, that means tracker
works under ARM state.
If vibration is detected under ARM state, tracker will be
awaken and work for 5 minutes.
DISARM by inductive key:
In ARM state,put the inductive
key to the top of the device rapidly for 2 times and then
remove the inductive key, LED flashes 2 times, that means
tracker works in DISARM state. The times put to inductive
key to disarm can be configured, and check chapter 6.19.3
