manualshive.com logo in svg

Zodiak GPS307, User Manual

Share
Download
Zodiak GPS307 User Manual Download Page 11

11

6.17.3 Geofence

Set up a geo-fence for the tracker device to restrict its movements within a district. The

unit will send SMS to the authorized numbers when it goes out of this district.

Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send

SMS“spspace+latitude,longitude;latitude,longitude” to unit to set the

restricted district. In case of breach, it will send SMS “st latitude & longitude” to

the authorized numbers.

Remark: The first latitude & longitude is coordinate of the top left corner of the Geo-

fence, while the second latitude & longitude is the coordinate of the bottom right corner, it

will send alarm SMS at interval of 3 minutes once beyond the restricted district.

Cancel: Send SMS “nospassword” to deactivate this function.

6.17.4 Movement alarm

6.17.4.1 Set up: when the unit stays immobile in a place for 3-10 minutes with GPS signal

reception, the user can send SMS“move+pspace+0200” to the tracker (Suppose

area of a radius of 200 meters, it supports 4 digits at most. Unit: Meter). It will reply

“move OK”. In case of such a movement (the default distance is 200m), it will send SMS

“Move+ latitude & longitude” to the authorized numbers .

6.17.4.2 Cancel: Send SMS “password” to deactivate .

6.17.5 Over speed alarm

6.17.5.1 Set up: Send SMS “speed+pspace+080” to the unit (suppose the speed is

80km/h), and it will reply “speed OK!”. When the target moves exceeding 80km/h, the

unit will send SMS “speed+080!+ latitude & longitude” to the authorized numbers every

3 minutes .

6.17.5.2 Cancel: Send SMS “password” to deactivate .

6.17.5.3 Remark: The recommended speed should be not less than 30km/h. For below that

rate, it will be effected the accuracy by GPS signals drift etc.

6.18 ARM/DISARM by inductive key

Inductive key can ARM DISARM by default .

To activate , send sms " pspace+on" to tracker ,it will reply " keyarm

on ok " , and then you can use inductive key to arm and disarm.

To deactivate , send sms " pspace+off" to tracker ,it will reply "

keyarm off ok " .

6.19 ARM/DISARM by SMS

6.19.1 ARM

Summary of Contents for GPS307
























Reviews:

No comments

Brands by name

Popular brands

Load more brands