13
Bicycle
mode I
No shock, the unit will enter sleep mode
with GPS &GSM off and runs in minimum
power consumption, SMS and calling cannot
reach. In arm state, shock can awake the
tracker to work; it cannot awake in disarm
state. Inductive key can awake unit to work
when triggered.
No shock and no other alarms being
triggered, GPRS disconnected
automatically and enter “Bicycle
mode I”, and will be back to online
if detect shock, SMS and calling
cannot awake it.
Bicycle
mode II
No shock, the unit will enter sleep mode
with GPS &GSM off and runs in minimum
power consumption, SMS and calling cannot
reach. In both arm and disarm state, shock
and inductive key trigger can awake the unit
to work
No shock and no other alarms being
triggered, GPRS disconnected
automatically and enter “Bicycle
mode II”, and will be back to online
if detect shock, SMS and calling
cannot awake it.
Scheduled
wake-up
After setting this mode in disarm status, the
unit will runs in minimum power
consumption with GSM &GPS off ,and SMS
or calling cannot reach. At Scheduled time,
the unit will automatically wake to send
Scheduled time report and work for 5
minutes.
GPRS status will works according
the scheduled time, it will be back
online at the scheduled time, GPRS
disconnected and enter “Scheduled
wake-up” mode for all the rest time.
6.21.1 Bicycle model I (Default mode)
Send SMS command to tracker device “sleep+pspace+bicycle1”, tracker will reply “sleep bicycle
1 ok”. In case of no operation in 5 minutes, tracker will enter low power consumption mode, GSM
、
GPS
、
LED shut off. Neither SMS nor Calling can awake tracker device. Tracker will only be awakened
by shock under ARM state, and won’t be awakened up under disarm states.
6.21.2 Bicycle mode II
Send SMS command to tracker device “ sleep+pspace+bicycle2” , tracker will reply “sleep
bicycle 2 ok”. In case of no operation in 5 minutes, tracker will enter low power consumption mode ,
GSM
、
GPS
、
LED shut off .Neither SMS nor Calling can awake tracker device. Tracker device will be
awaken by shock and send message under both ARM and DISARM state.
6.21.3 Sleep by shock sensor
Send SMS command to tracker device “sleep+pspace+shock”, tracker will reply” sleep shock
ok”. It will enter sleep mode if no vibration is detected. GPS
、
LED shut off. SMS
、
Calling
、
Shock can
awake the tracker .
