background image

If you are having a coverage problem you cannot solve, mail or fax us the following information along with a 

sketch of your pool

shape, including dished out or hopper areas if they exist,  and indicating the location of skimmers, inlets, ladders, and the filter
system. Also include a brief description of the problem.

(Send a photocopy and retain this page for future use.)

MAIL TO:

ZODIAC POOL CARE, INC. 
2028 NW 25th Avenue, Pompano Beach, FL 33069 

OR FAX TO:

(954) 935-8279

CUSTOMER NAME: ____________________________________TELEPHONE NO: (_______)  __________________

ADDRESS:________________________________________________________________________________________

CITY: _________________________________________________STATE: __________________ZIP: ______________

SERIAL NO.:___________________________________________PURCHASED FROM: ________________________

POOL SIZE: ___________________________________________PUMP SIZE (H.P.): ___________________________

FILTER (circle one):

SAND

D.E.

CARTRIDGE

FILTER SIZE (or Model No.) ________________________

LET US HELP WITH YOUR ZIPPY

®

Indicate problem:

ZODIAC POOL CARE, INC.

2028 NW 25th Avenue

Pompano Beach, FL 33069

1-888-786-7797

www.zodiacpoolcare.com

© Copyright 2003

Summary of Contents for Zippy













Reviews: