Page
2
Zodiac Voyager RE Robotic Pool Cleaners
|
Owner's Manual
Zodiac
Voyager RE
Robotic Pool Cleaners |
Owner’s Manual
Page 17
4.
Remove the fi lter canister assembly from
the body (3).
Figure 20. Remove Filter Canister Assembly
5.
Pull down on the outer canister to separate
the two fi lters.
Figure 21. Separate Filter Canisters
Figure 22. Dual Filtration Canisters
6.
Empty all debris from the fi lter canisters,
then rinse canisters and the cleaner using
a hose.
Figure 23. Wash Filter Canisters
NOTE
: Periodically, deep-clean the filter canisters with
soapy water and a soft bristle brush.
Store the Cleaner When Not in Use
The cleaner should be cleaned regularly using
slightly soapy clean water. Do not use solvents
such as trichlorethylene or its equivalent. Rinse
the cleaner generously using clean water. Do not
let your cleaner dry in direct sunlight near the pool.
The cleaner should be stored on its caddy so that
it dries quickly.
1.
Disconnect cleaner from the power source.
2.
Starting at the cleaner head, remove all
coils and tangles from the cable. Lay the
cable in the sun to loosen any tangling
memory.
3.
Place the rear wheels on the caddy and
position the cleaner vertically on the caddy
base.
4.
Disconnect the cable from the Control Unit.
Replace the protective cap on the Control
Unit.
Page
17
Zodiac
Voyager RE Robotic Pool Cleaners | Owner's Manual