![background image](http://html.mh-extra.com/html/zodiac/vortex-3/vortex-3_instructions-for-installation-and-use-manual_936511007.webp)
H0360600.A2.EN
Ver.05/2011
6
•Ifyouwishtorunanewprogrammeoncethecleanerhasstoppedpressthecorrespondingbutton.
Before removing the cleaner from the pool,
disconnect the power cable and disconnect
the floating cable from the control box. Bring
the cleaner towards you, by gently pulling on
thecable(
Diagram131
).
Assoonastherobotiswithinreach,takeholdofitusingthehandle(
132
)andgentlyremoveitfromthepool,
allowingthewateritcontainstodrainbackintothepool(
133
).
2.5.REMOTECONTROLMODE(VORTEX™4)
Youcansteertherobotfreelyusingtheremotecontrolunit.
Thereare4keysontheremoteunit:
To use the remote control feature, simply press a key when the robot is operational in the swimming pool.
Simplypressbrieflythe"forward"and"reverse"keystocontroltherobotaccordingly.Maintainthe"right"or
"left"keystoturntherobotinthecorrespondingdirection.
Wheninuse,thetwodiodes
willflashalternately.
Toreverttotheautomaticmode:
x
Donotpressonoruseanyoftheremotecontrolkeysforaminimumof45seconds.
x
Pressthe
or
key.
2.5.1.Synchronisationprocedure
If you have replaced the control unit or the remote control unit in terms of after sales or repair, it will be
necessarytosynchronise/pairthetwoitemswitheachotheronceagain:
x
Connecttherobottothecontrolunitthenconnectthecontrolunittothemainpowersupply.
x
Press
+
formorethan6secondsuntilthe2diodesflash
x
Holddownthekey
ontheremotecontrol.
x
The diode on the right will flash 5 times
then the two diodes will flash simultaneously
.
x
Theremotecontroliscorrectlysynchronisedwiththecontrolunitwhenthediodesturnoff.
2.6.USAGEWITHANEXTERNALTIMER(VORTEX™4)
Inthismode the control unit canlaunchapreset
or
cleaning cyclewhentheunitdetectsanexternal
powersource(timer).
Youcanselecteitherabottomonlycycle
orabottomandwallscycle
:thediodeforthecorresponding
programmewillflash.
Regardlessofthecycleselected,thecleaningtimeis2hrs30min.Thisdurationcannotbechanged.Program
thetimerforaminimumoperationtimeof3hours.
Donotpullonthecabletoremovethecleanerfromthewater.
Wait approximately 15 minutes after the end of the programme before removing the cleaner from the
water.
Diagram13
Turnleft
Forward
Turn
right
Reverse
EN