H0360600.A2.EN
Ver.05/2011
3
g) Placethe2capsonthewheelsasshownon
Diagram4.
h) Position blocks (10) and (11) using the 4 screws, paying
attention to the arrows and orientation,
Diagram 5 or 6
(according to model).
Tighten the screws using a Philips
screwdriver.
USE
2.1.RECOMMENDATIONSFORUSE
x
Thecleanermustoperateinpoolwatermaintainedatthefollowinglevels:Chlorine<3mg,pHbetween6.8
and7.6,temperaturebetween10°Cand35°C.
x
Useyourcleanerasoftenaspossible.Youwillbenefitfromapoolthatisalwayscleanandthefilterwillnot
becomeclogged.
x
If the pool is very dirty, especially during first use, remove larger pieces of debris using a net in order to
optimisethecleaner'sperformance.
x
Removethermometers,toysandotherobjectsthatmightdamagethecleanerfromthewater.
x
Immersethecleanerinthepool,beforestartingacleaningcycle.
x
Donotleavethecleanerinthewaterpermanently.
x
Stowyourcleaneronitscaddyassoonaspossibleafteruse,inordertoavoiddistortingtheflexibleedgeat
theopeningtothefilter.
x
Nevercoverthecontrolboxwhilethecleanerisinoperation
x
Donotleavethecontrolboxindirectsunlightafterhavingusedthecleaner.
x
Ifpartofthepoolisnotproperlycleaned,changetheplacewhereyouimmersethecleaneruntilyoufindthe
bestpositionofentrytoachievethebestcoverage.
x
The cleaner's behaviour is strongly influenced if the cable is tangled. Spread the cable out in the sun from
timetotimesothatitresumesitsoriginalshape.
x
Thebehaviourofthecleanercanbeinfluencedbythejetatthepoolreturnoutletsespeciallywhenthefilter
pump is operational. In this case we recommend that you start your cleaner when the filter pump is not
operational.
Donotuseyourcleanerduringshockchlorination!
Diagram6=Vortex™34WD
Diagram5=Vortex™3,Vortex™4
Diagram4
Diagram1a
