![background image](http://html1.mh-extra.com/html/zodiac/vortex-3-plus/vortex-3-plus_installation-and-user-manual_936516014.webp)
13
2.6.2 Programming cleaning cycles
Program
up to 7 cleaning cycles
(for example, 2 days per week: Wednesdays and Saturdays over 4 weeks).
•
You must set the time before you program the cleaning cycles, see § « 2.6.1 Setting the time ».
•
Start by selecting the cleaning cycle on the control box, see § « 2.5.1 Cleaning mode selection (depending on model) ».
•
Then program the days, hours and minutes.
DAY
Press for 3 seconds on
The days of the week flash twice.
The
LED and the current
date and time flash to remind
you.
Press
to start programming
Select the day with
or
Press
to confirm,
HOURS
The hours start to flash
Select the hour with
or
Press
to confirm,
MINUTES
The minutes start to flash
Select the minutes with
or
(every 1/4 hour)
Press
to confirm,
To cancel a day's programming,
hold down
until the display
changes.
Exit the menu by pressing
or
•
The programming stops automatically at the end of the 7th cleaning cycle and the LED
switches off.
•
To cancel ALL the programming, exit the menu
and hold down
until the display changes.
Tip: check the programming
Press
. Each programming is displayed for 3 seconds.