Zodiac vortex 2, Instructions For Installation And Use Manual

Page: 5 / 8

H04268
‐
00.A3 EN – 2013
‐
09
4
2. Description of the control box
3. Use
3.1 Starting up the cleaner

You can launch the cleaning cycle by pressing the "START / STOP" button.
3.2 Stopping the cleaner

Press the "START / STOP" button on the control box.
3.3 Removing the cleaner from the water
When the cleaner is within hand's reach pick it up by the handle and lift it gently out
of the pool so that the water it contains drains into the pool (1).
4. Maintenance
4.1 Cleaning the filter

Filter access

The pool cleaner is so efficient that it is not necessary to run more than 3 cycles per week
Don't pull on the cable to remove the cleaner from the pool. Use the handle.
The cleaner performance can be reduced if the filter is full or dirty. Make sure you clean the filter regularly
with clean water for efficient pool cleaning.
Start / Stop the cleaner
(Cleaning: bottom + walls +
water line)
"Control" indicator
(see section 5.1)
