6
PREPARINg yOuR POOl AND FIlTRATION sysTEM
IMPORTANT
The filtration system must be operating at its maximum water flow before you install
your PACER™, otherwise you will have to re-adjust it after cleaning the pool filter.
Installation is easy if you follow these simple preliminary steps:
1.
Empty the weir basket.
2.
clean the pump basket.
3.
Backwash the filter until the sight glass is clear.
4.
Adjust all return jets (whether your pool has one, two, or more) to point
downwards and towards each other so that you DO NOT see a circular water flow
or ripples on the surface of your pool.
AssEMBlINg yOuR PAcER™
1. Fit the disc over the Flexi-foot (base) of your machine, with the top of the disc
(marked TOP) facing towards the machine. (see diagram 1)
2. Position disc underneath the Stop Block (A) then position under the disc Retaining
Lug (B). (see diagram 2)
3. Ensure that the disc rotates freely around the Flexi-foot once it has been fitted.
sEcTION 1 – INsTAllATION
Diagram 2: Fitting the disc.
Position underneath Retaining lug.
Diagram 3
Diagram 1 : Fitting the disc.
4. Every PACER™ Pool Cleaner is supplied with a Medium
Deflector Wheel. The purpose of this wheel is to protect
the Outer Extension Pipe and Main Body and also to
guide the PACER™ away from swimming pool steps
or stairs. Position the Deflector Wheel on the
Outer Extension Pipe as in diagram 3. Then push
down firmly on the Deflector Wheel, the Deflector
Wheel will click into place. Make sure the top clips
are seated in the groove. Ensure that the Deflector
Wheel rotates freely.
Summary of Contents for Pacer
Page 1: ...1 ...