background image

H0354600.E EN - 2015/01

1

• 

Please read these instructions carefully before installing, maintaining or repairing the device!

•  The 

 symbol identifies important information that must be observed to avoid any risk of harm to per

-

sons or damage to the device.

•  The 

 symbol identifies useful information.

  

WARNINGS

• 

We are constantly improving our products and they may be modified without prior notice.

• 

This device must only be used for cleaning swimming pool water, and for no other purpose.

• 

The device must only be used by competent, physically and mentally able persons who have been informed 

about its use by reading these instructions. Anyone who does not meet these conditions should keep away 

from the device, as they may risk exposure to dangerous components.

• 

If the device does not function correctly, do not try to repair it yourself. Contact your reseller.

• 

The cleaner needs to operate in swimming pool water under the following conditions: chlorine < 3 mg/l; pH 

between 6.8 and 7.6; temperature between 15°C and 35°C.

• 

Do not operate the cleaner out of the water.

• 

Incorrect installation or use may lead to serious physical damage or bodily injury, which may cause death.

• 

Ensure that the vacuum equipment installed in your pool to which you connect the hydraulic cleaner com

-

plies with the current safety standards.

• 

Do not obstruct the pool's vacuum nozzles, the cleaner's vacuum inlet or the cleaner's hoses. Keep your hair, 

loose clothing, jewellery etc. away from the vacuum nozzles of the pool and cleaner.

• 

To reduce the risk of injury, keep the device out of the reach of children. Never allow anyone, and especially 

young children, to sit, put their feet, lean or climb on equipment that is part of the pool's operational sys

-

tem.

• 

Do not enter the pool while the cleaner is in the water.

WARNING ON THE USE OF THIS CLEANER IN A POOL WITH A VINYL SURFACE

Before installing your new cleaning cleaner, carefully inspect the lining of your pool. If the liner is flaking away 

in places, or if you notice grit, creases, roots or corrosion due to metal beneath the liner, or if you see that the 

surface (bottom and sides) is damaged, 

do not install the cleaner until you have carried out the necessary re

-

pairs

 or had the liner replaced by a qualified professional. 

Zodiac® cannot be held responsible for any damage 

caused to the liner.

The surface of certain vinyl patterned surfaces can wear rapidly and the patterns disappear on contact with ob-

jects such as cleaning brushes, toys, inflatable buoys, chlorine distributors and automatic pool cleaners. Erased 

patterns, wear or scratching of vinyl surfaces are not the liability of Zodiac® and are not covered by the limited 

warranty.

Summary of Contents for MX6 Elite











Reviews: