Page 13
Page 12
Ei3 Saltwater Chlorinator | Installation Manual
4. Use cable ties to hold in place if necessary,
then replace the cover/s.
5. Plug the relay switch box into any
available 240V GPO.
6. Plug the light transformer directly into the
socket located in the switch box. This will now
control the light directly from the chlorinator.
Chlorinator
Power pack
LOW VOLTAGE
HIGH VOLTAGE
240VAC Outlet
Light Transformer
2X OR 4X
LIGHT
TRANSFORMER
Low voltage cable
from transformer
to pool light
Light transformer
plugs into socket
outlet on relay
switch box
Relay switch box
plugs directly into
240VAC for power
Low voltage 2 core cable
wires directly to red
terminal on relay switch
and into AUX 2 terminal
on power pack
Pool Light
Relay Switch Box
Figure 9. Light Transformer, Switch Box and
Chlorinator Connections
7.2.1
Assign Lights
1. Press
.
2. Use
to select “Aux/Light” then press .
3. Use
to select “Assign Lights” then press .
4. Use
to select “Aux 2” then press .
5. Use
to select “Yes” then press .
6. Use
to select “White Light” or “Color
Light” then press .
7. Press
to exit.
<
-AUX/LIGHTS
-PROGRAMMING
-LOW MODE
-SLAVE MODE
-REVERSING
-HELP MENU
-LANGUAGE
MAIN MENU
<
AUX/LIGHTS
-ASSIGN LIGHTS
-AUX 2
<
ASSIGN LIGHTS
-AUX 2
<
AUX SETUP
AUX
2 = LIGHT?
YES
NO
<
AUX
2 = LIGHT
-WHITE LIGHT
-COLOR LIGHT