![background image](http://html2.mh-extra.com/html/zodiac/duoclear/duoclear_installation-manual-and-owners-manual_3997980017.webp)
How Much Salt to Add
Regular use of sodium hypochlorite (liquid chlorine) creates residual salt within the pool and may bring
the salt level close to the required 4000 ppm concentration.
Generally, in a pool of approximately 13,200 gallons, one (1) 50 lb. bag of salt will increase the salt
concentration by 500 ppm. In a new pool (where there is no salt residual) of approximately 13,200
gallons, eight (8) 50 lb bags of salt are required to reach a 4000 ppm concentration. For exact
requirements, refer to the chart below.
Salt Requirements
Pounds and (KG) of salt needed to raise level to 4000 PPM
How to Add Salt
Only 99.5% pure refined, non-iodized salt (sodium chloride) should be used with the DuoClear system.
Do not use salt containing YPS (yellow prussate of soda) as it may stain the plaster finish.
•
Disperse salt evenly around the perimeter of the pool, brushing it until it dissolves. Do not add
salt to skimmer.
•
Run filter for 4-6 hours.
•
Allow 24 hours for salt to fully dissolve. If the ADD SALT light is on after 24 hours, test salt level and
add necessary salt to obtain a 4000 ppm concentration.
17
Summary of Contents for DuoClear
Page 1: ...Complete In Ground Pool Sanitizing System Installation Guide and Owner s Manual...
Page 4: ......
Page 6: ......
Page 23: ......