1
3
2
Figure 22. Stretch Track Around Wheels
5.
Verify the rib of the track is positioned properly
within the groove of each of the three wheels
and under the track guide. If necessary, turn the
wheels gently to seat the track.
Section 5. Troubleshooting
5.1 Using the Information LED
The information LED
on the Control box flashes
in a specific sequence to indicate one of three possible
cleaner malfunctions.
LED Flashing
Cause
Solution
1 Flash
LED flashes once
Floating cable may not be plugged
into the Control box correctly.
Unplug the floating cable from the
Control box and reconnect.
If the problem persists, contact
Zodiac After Sales Support at
1300 763 021
2 Flashes
LED flashes twice
Cleaner wheels may be jammed
or brushes may be blocked with
debris.
Turn cleaner wheels to ensure
they are not jammed.
Check brushes for debris.
Start a new cleaning cycle.
If the problem persists, contact
Zodiac After Sales Support at
1300 763 021.
3 Flashes
LED flashes three
Pump axis or propeller may be
jammed with debris.
Dirty filter.
Check the pump axis for debris.
Check propeller for debris.
Clean the filter.
Start a new cleaning cycle.
If the problem persists, contact
Zodiac After Sales Support at
1300 763 021.
12
H0446500_REV A
Summary of Contents for CyclonX CX20
Page 15: ...NOTES 15 H0446500_REV A...