Zodiac BOREAL, Instructons For Installaton And Use

Page: 7 / 12

H0441600.C - EN - 2014-09 6
EN
osition : inter
se when the pool is wintered water
le el down and pipes drained . his
position sets the internal seals of the
multiwa al e to stand to protect
them and eep them in good condition.
osition : ltration
ater is sent to the lter medium and
returned to the pool.
osition : washing
he lter medium is ac ushed. he
water circulation direction in the lter
is re ersed and the water discharged
to the e acuation to eliminate the
impurities.
osition : rinsing
ater is sent to the lter medium
and sent to the e acuation. his is
carried out to complete the washing
procedure and se le the lter medium
in the lter as well as to clean the lter
pipes a er ac ushing.
osition : draining
This is carried out to drain the pool
or lower the water le el. he water is
sent directl to the e acuation without
going through the lter.
In this case, close the valves
so that water is only sucked
through the bottom plug
holes to prevent air from
getting into the pipes.
osition : circulation
ater is circulated without going
through the lter and sent directl to
the pool.
3.3 Multiway valve positions
osition : closed
ater no longer circulates in the multiwa al e or the lter.
Do not run the filtration pump when the valve is in this position!
4. Maintenance
General maintenance of the appliance is recommended when the pool is wintered and before restarting, to
check that it operates correctly and maintains its performance, as well as to prevent certain types of failure.
These operations are carried out at the user's expense, by a qualified technician.
4.1 Maintenance instructions
• Ma e sure that the lter contains no foreign odies.
• Clean the outside of the appliance, do not use solvent-based products.
•
hec regularl that the co er seals and connections are in good condition.