15
SECTION 9 – LET US HELP!
SECTION 1 – PREPARING YOUR POOL
FILTRATION SYSTEM
2
PREPARE POOL AND FILTRATION SYSTEM
Step 1:
Turn off the main drain, where main drain control is connected.
Step 2:
Manually vacuum your pool.
Step 3:
Clean the filter and empty the skimmer basket(s) and the pump strainer
basket according to the manufacturer’s instructions.
Note:
The circulation system must be operating at its maximum water flow
when you install the Automatic Pool Cleaner otherwise readjustment
will be necessary when you clean the filter and baskets.
Step 4:
Adjust the water flow from all return inlets (a) downward and toward
each other or (b) downward and toward the centre of the pool.
See page 6 for additional information.
All diagrams are provided for
reference and for terminology used
throughout this manual. Your pool
may vary.
GENERAL POOL SCHEMATIC
If you are having a coverage problem you cannot solve, mail or fax us the
following information along with a sketch of your pool shape indicating the
location of all skimmers, vacuum lines, inlets, stairs, ladders, swimouts, spas,
waterfalls, filter systems or other significant features and a brief description of
the problem. (Send a photocopy and retain this page for future use.)
Mail to:
Zodiac Group Australia PO Box 7238,Wetherill Park 2164
Fax to:
(02) 9896 5766
Your Name
Tel. No.
Postal Address
Suburb
State
Postcode
Serial Number Purchased from Date of Purchase
Pool Finish (Tick one): Pebble
■
■
Vinyl
■
■
Fibreglass
■
■
Other
Pool Size (L) Pump Size (H.P.)
Type of Filter (Tick one):
Sand
■
■
D.E.
■
■
Cartridge
■
■
Filter Size (or Model No.)
Briefly describe the problem:
