12
2.5 I Meaning of the sensor LED (depending on the model)
LED status
Blue
Green
Orange
Off
Steady
Cleaning cycle activated
"Lift System" or
"Spot Clean" function
activated
Filter full
No current cycle or
error
Flashing
Cycle in progress, pool
analysis, or finishing
phases
Remote control function
activated
N/A
2.6 I Removing the cleaner from the water
•
To prevent damaging the equipment, use only the handle to remove the appliance from the
pool.
2.6.1 "LIFT SYSTEM" automated function
The "Lift System" function was designed to facilitate removing the cleaner from the water. It may be activated at any
time, during or at the end of a cleaning cycle.
•
If necessary, press and hold the button
to direct the cleaner towards the required wall, the cleaner pivots.
When facing the right wall, release the button. The cleaner moves towards the wall (see
image
).
•
Or just briefly press the button
to move it towards the opposite wall (see
image
).
•
The cleaner climbs the wall and stays at the waterline (see image ).
•
Use the handle to take it out of the water. The cleaner expels water through a rear jet to make it lighter (see
image
).
00'60''
EN
