6
7
settinG uP for oPeration
MagnaPool Control Centre can be controlled in a number of ways:
1. Manually set to an output level, with the operating times
determined by an external timer.
2. Using the in-built timers (refer to ‘The Timers’)
3. Using a connection to an external controller
(refer to ‘Connecting to a controller’).
To turn on manually, press the ON/OFF button. The output level can
be set as described in ‘Setting the Sanitizer Output.’
NOTE: For safety reasons, MagnaPool will operate for a maximum of 30 hours if left
running with no ‘OFF’ time – unless connected to en external controller. After this
time it will switch to ‘OFF’.
the timers
MagnaPool comes with two inbuilt timers that switch the system on
and off as required.
During swimming season, consider running the system for around
8 hours a day. This can be increased to 10 hours during periods of
very hot weather.
In winter, it may only be necessary to run your pool’s filtration
system for 4 hours a day. These shorter periods of activity will
lengthen the life of the unit’s electrode.
For best year round results, set the unit to operate during the cooler
hours of the early morning, evening or when swimmers are using the
pool.
ProGramminG the timers
To activate the timer, you will need to enter both an ON and OFF
time. If no OFF time is entered, the system will switch off at the
default time of 12:00am (0:00).
You will know that a valid time has been entered when a “T” Symbol
is displayed in the top right hand corner of the LCD display when
the unit is displaying the ‘operating screen’.
usinG inBuilt clocK anD timers
usinG inBuilt clocK anD timers
