4
5
installation GuiDe
naviGation Buttons
PositioninG the control centre
1. Locate a suitable space for
the control centre bracket.
It should be installed no
further than 1.8 metres away
from the cell - ideally in a
filtration shed or close to the
filtration equipment.
PLEASE NOTE: if fixing to a post it
must have a waterproof panel fitted
(behind the unit), at least 450mm
wide and 470mm high.
2. Using screws provided, fasten the bracket securely to the wall
and position the power pack on the bracket. Plug into power
point, but don’t turn on the power.
PositioninG the hYDroXinator cell
The Hydroxinator cell’s function is twofold, it produces
Magnesium Hydroxide which keeps your pool crystal clear, plus
it produces a sanitizer (chlorine) to keep your pool safe from any
bacteria or viruses thereby providing you with a beautifully safe
swimming environment.
PLEASE NOTE: The cell should always be the last device placed on the water
pipe (In the return line to the pool).
3. Ensure the cell is placed horizontally, with the Inlet pipe
connecting to the fitting closest to the cell lead.
4. Using screw barrel fittings (supplied), attach the cell to the pipe.
If using 40mm pipe, you will need to fit the cell using the
reducing bushes (also supplied).
5. When connecting the lead from the power pack to the cell match
up the corresponding colours and pins, then fit the end cap.
(Note: Either RED wire can be connected to either RED pin on the electrode.)
6. Plug your pool pump into the outlet socket in the bottom of the
MagnaPool Control Centre (this will allow the built in timer to
control the filtration times)
7. Once all connections are together press the mains power switch
to ON.
