www.znshinesolar.com
Document No.
：
QES/ZX-RD-III032A
- 7 -
3.4
、
STORAGE
1
、
Do not remove the original packaging if the module requires long-distance transport or long-term storage.
2
、
Do not expose the modules to rain or moisture. Store the finished product in a well ventilated, waterproof,
dry and smooth place.
3
、
Do not stack modules more than 2 layers. (moisture
＜
85%RH, temperature range from -20°C to + 50 °C)
4
、
The module must be installed as soon as possible in the project site and must not be exposed to rain or
damp. ZNSHINE SOLAR shall not be responsible for any damage or collapse of the modules caused by moisture
in the packaging.
4
、
UNPACKING SAFETY
（
1
）
For unpacking outdoors, it is prohibited to operate in rainy conditions. Because the carton will become
soft and damaged after it gets wet in the rain. The stacked PV modules (hereinafter referred to as "modules") may
tip over, which may cause damage or injury to personnel.
（
2
）
For a windy site, it is necessary to pay special attention to safety. Especially, it is not recommended to
transport or unpacking the modules in high wind conditions. The unpacked modules must be tied down to avoid
any unwanted movement.
（
3
）
The work surface is required to be level to ensure that the package can be placed stably, avoiding
sliding.
（
4
）
Wear protective gloves during unpacking to avoid hand injury and fingerprints on the glass surface.
（
5
）
Each module shall be handled by two persons. It is forbidden to pull the wires or junction boxes and
frame of the modules to carry the module.
