P a g e
1 | 14
正信光电科技股份有限公司
ZNSHINE PV-TECH CO.,LTD
Mounting Manual
INSTALLATION INSTRUCTION FOR SINGLE GLASS SOLAR MODULE
S
ingle glass solar modules are made of 120/132/144/pcs of 158.75mm
×79
.375mm crystalline solar cells in
series with high efficiency, high transmission and low iron toughened glasses , anti-aging EVA and high flame-
resistant back sheet to laminate, and anodized aluminum alloy frame. Products have high efficiency, lifespan
easy installation, high wind resistance etc.
Products are made according to international standard IEC61215-2016; IEC61730-2016 and have passed
authority test center’s examination. Our products can be used in home roof solar systems, PV stations,
communication stations, petrol, ocean, meteorological, traffic and solar building etc.
Information for installers
Installers must read and understand this manual before installation.
Please ensure that installation, operation and maintenance of your photovoltaic system is only carried
out by qualified persons able to carry out the technical procedures described in this manual, i.e. system planers,
installers and maintenance personnel, and is carried out in accordance with all safety precautions in this manual
and any and all applicable local codes. If you do not possess these qualifications, you may not carry out the work
described herein except for cleaning.
This manual and the instructions set forth herein are part of the product and should therefore be kept for
the entire useful life of the solar installation.
Information for operators
Keep these instructions safe for the entire useful life of the solar installation.
Please contact your plant supplier for information concerning the formal requirements for solar systems.
Please be sure to learn about directives and permit requirements from the responsible local authorities and
energy providers prior to installation of the solar plant.
We recommend that you insure your solar system against natural hazards (e.g. against lightning strikes).
