Screwing-on the plug
How to charge a mobile USB-device with notstrøm
Select connection
Switch on the nostrøm
Remove the protective cap from the charge
port of notstrøm and screw on the water-
proof plug of the charging cable.
Note:
Please ensure that the notstrøm is switched
on so that charging process can start.
Warning:
Ensure that the union nut is tightened. Only
then a significant connection is developed
with the notstrøm.
Connect the micro-
USB-plug of Y-cable
with the device you
want to charge.
(e.g. all Android
& Windows
Smartphones).
Press the On/Off switch for 2 seconds to turn
on the notstrøm. The LED-display is now
activiated and the connected device is now
charged.
Warning:
If you press the On/Off switch for a very short
time, the LED-display is only activated - the
notstrøm is however
not switched on
(see
stealth mode)!
Connect your USB-charging cable with the
USB-coupling of Y-cable. (e.g. iPhone/iPad,
devices with mini-USB connection).
EN
Union nut
Micro-USB plug
On/Off switch
USB coupling
Summary of Contents for Notstrom
Page 9: ......
Page 10: ...m3 950 Lumens...
