- 7 -
To play other recordings made with the LIBERATOR sound system, press the [
] (15)
or [
] (17) button.
[REC]
a) press and hold for 2 seconds - recording on the USB or SD drive will start from MIC,
FM or LINE IN.
b) pressing and releasing will play the recording made with the LIBERATOR back.
Power Bank function
If you need to charge the battery of a mobile device, connect the mobile device to the USB port
CHARGE
(4).
It is not recommended to connect devices with a greater battery capacity (tablets or
powerful smartphones) using the specific USB port.
Light effects:
If the
LED
switch (28) is
ON
, the sound system is lit up with rhythmic multicoloured light effects
(depending on the volume and rhythm of the track).
REMOTE CONTROL
Before the use of remote control, two R03/AAA 1.5V batteries must be inserted.
Key functions:
[ ]
- switching on of the sound system/ shifting into standby mode.
[ ]
- switching off of sound.
[FL-]
- previous folder.
[FL.REP]
- selection of folder repeating/ playing type (in USB/SD mode).
"A" - cyclic playback of all tracks;
"F" - cyclic arrangement of the current folder.
[FL+]
- next folder.
[EQ]
- shifting of equalized modes (in USB/SD/Bluetooth).
[VOL+ ]
- turning the volume up.
[ /CH-]
- previous track/ previous FM radio station.
[ / FM SCAN] - pause mode/ scanning of FM range.
[ /CH+]
- next track/ next FM radio station.
[VOL- ]
- turning the volume down.
[0] - [9]
- digital keys for the entry of digital (MP3) track number /
selection of the stations fixed in FM radio memory.
[REC]
- recording from MIC/FM/LINE IN.
[MODE]
- mode shift (BlueTooth/
/ /FM/Linein).
- "1" – repeated playback of one composition;
"A" - playback of all compositions.
INSTRUCTIONS FOR CORRECT USE
This is a complicated device and must be handled with care. In order to provide long and reliable
operation of the sound system, please, comply with the instructions described below.
1. Do not put the sound system in a place with very high temperature (over 40˚C).
2. Prevent contact of the system with water or any other liquids.
3. Do not approximate the system with powerful sources of electric field and static electricity.
