- 3 -
CONNECTING AN EXTERNAL 12V DC POWER SUPPLY
The sound system can run from an external DC power supply unit with an output voltage of
12-15V, and a power of at least 80W.
Before feeding the sound system from an external power supply unit, disconnect the power cord
from the socket
~220V-240V 50/60 Hz
(29).
Observing the polarity is important when connecting cables. Incorrect polarity can damage
your sound system or other equipment!
Connect the ʺ+ʺ output lead of the external power supply unit to the red terminal of
BATTERY
12V INPUT
(26), and the ʺ-ʺ lead, to the black terminal.
Then, set the
POWER
(27) switch to
ON/DC
.
Do not connect other electric devices (e.g. a 12V lamp) to the
BATTERY 12V INPUT
(26)
terminals of the sound system.
USE
Switching on:
The sound system can be powered in two ways:
1) from a 230V, ~50/60Hz mains supply (set the
POWER
(27) switch to
ON/AC
),
2) from a 12V battery (set the
POWER
(27) switch to
ON/DC
).
Volume adjustment:
The sound system has two volume controllers:
a)
VOLUME
(21), adjusts (limits) the maximum volume.
b) digital controller with buttons [
] (15), [
] (17) and remote control buttons [VOL-],
[VOL+].
You can turn the volume down or up by pressing and holding the button [
] (15) or [ ] (17).
It is recommended to set the digital volume controller at the level of increased or maximum
volume and to change the required volume by using the controller
VOLUME
(21).
Equalizer (in USB/SD/Bluetooth)
During playback of digital records (e. g. MP3), you can change equalizer modes by pressing the
[EQ] button on the remote:
NOR > ROCK > POP > CLAS > JAZZ > COUN.
For the best possible sound, appropriate equalizer mode must be selected for the style of
each track.
Playback of digital records:
1. Place USB flash memory or SD memory card with MP3/FLAC/WMA/WAV records in the
respective port.
If USB flash memory or SD memory card is placed or removed from sound system that is
switched on, damage to information and/or device is possible!
2. Switch on the sound system by using the switch
POWER
(27). Playback of digital record will
start.
- If another mode has been used previously ("Linein", "BlueTooth", FM), push the key
[MODE]
(13) or [
MODE
] on the remote), choose USB/SD mode ("
" or " " on display).
- Switch on or cancel the playback pause mode with the key [ ] (16).
- Selection of the next or previous track:
"Fast forward" by temporarily pressing the key [
] (17).
"Rewind" by temporarily pressing the key [
] (15).
