ZMC303 Motion Controller User Manual V1.5
3.9.2.
Basic Usage Method
(1)
Please follow the above wiring instructions to wiring correctly.
(2)
After powered on, please use any one interface among the three interfaces ETHERNET,
RS232 (default parameter, it can be connected directly) and RS485 (default
parameters, it can be connected directly, but for hardware, adapter head is needed)
to connect to ZDevelop.
(3)
Set axis parameters, such as, ATYPE, UNITS, SPEED, ACCEL, FWD_IN, REV_IN, etc.
(4)
There are many parameters related to pulse axis, they can be set and checked
through relative instructions, please see “axis parameter and axis status” of “ZBasic”,
or see “ZDevelop/View/Axis parameter”.
(5)
Control corresponding motion throu
gh “View –
Manual”.
Summary of Contents for ZMC303
Page 1: ......
