26
25
Stop/Go
Timer
OPERATION
OPERATION
RESIDUAL HEAT INDICATOR
• After using the cooktop, the cooking area will remain hot for a few minutes. The
digital display will show an “H” to warn the user that the surface is hot to touch.
Wait until the “H” is no longer displayed to clean the unit. You may turn the
cooktop on even if the “H” is displayed.
ONLY FOR 24” MODEL (RCIND-24)
STOP/GO
Use the Stop/Go function to ‘Pause’ the cooktop for Max. 10 minutes while
cooking the unit will be automatically switched off if Stop/Go is not touched
again within 10 minutes.
TO TURN ON
• If one or more cooking zones are active, touch Stop/Go key pad. A “beep” will
sound, the indicator light above the Stop/Go will be lit up, and all active digital
displays of the cooktop will blink. Any set cooking timers will stop. When “Stop
and Go” is deactivated, the countdown will continue.
• If all of the buttons are inactive except for Stop/Go, Lock, ON/OFF and
POWER key and no keys are touched within 10 minutes, all of the active cooking
zones are automatically switched off.
TO TURN OFF
Touch Stop/Go key again within 10 minutes. The indicator light above Stop/Go
button will turn off and the cooktop continues with the settings that were set before the
Stop / Go.
TIMER
• A short key press adjusts the time by 1 minute and a long key press by 10
minutes. The automatic timer range from 1 minute - 99 minutes. This is used to
automatically turn off the cooktop.
• NOTE:
Seconds are not used in the timer settings.
• The red dot next to the time symbol indicator will illuminate indicating that the
cooking elements is selected.
TO SET TIMER
• While cooking, touch the timer key pad until the time light of the desired cooking
element is on. Time digital displays read “00” and blinking.
• Use “+” or “-” key to adjust and set the desired time.
• The timer will begin 5 seconds after setting the timer.
• The display will stop blinking and will stay static on the display.
• The cooking element that the timer was set on will automatically shut off once
time runs out.
• If you want to set another burner to a timer, touch timer key to the desired time
symbol indicator blinks, repeat the same steps above.
• If you want to check the remaining time for another cooking element, touch the
timer until the time symbol indicator for the desired cooking element blinks.
• If more than one switch-off time is programmed, the shortest time remaining will
show in the digital display.
TO CANCEL TIMER
• Touch the Timer until the time symbol indicator for the desired cooking element
blinks, then touch the “+” or “- ” to set the timer to 00.
• The Time digital display will blink for 5 seconds and then turn off, indicating that
the timer of selected cooking element has been cancelled.
