Zline RBIV-30 Installation Manual And User'S Manual Download Page 38

Page: 38 / 116

eparing

Refriger

ator

Enclosur

PRE-INSTALLATION

Continue to install the product according to the instructions below. Additionally,
consider national and local instructions regarding installation.

Please observe the following:
• For the USA, The National Electrical Code, ANSI/NFPA 70 – last version/State

or Municipality directives and/or regional directives.

• For Canada, The Canadian Electrical Code, C22.1 – last version/State or

Municipality directives and/or regional directives.

Mounting the Anti-Tip Brackets

Anti-Tip Brackets must be installed to prevent the appliance from tipping
over.

WARNING

Make sure that there is no electrical or water connection where the
screws will be tighten and connections will be established.

WARNING

Please remember to use the necessary protective equipment when
drilling holes on the wall and performing installation.

WARNING

INSTALLATION

Summary of Contents for RBIV-30





















































































































Search results

Summary of Contents for RBIV-30

Reviews:

Related manuals for RBIV-30

Brands by name

Popular brands

Zline RBIV-30, Installation Manual And User'S Manual

Search results

Summary of Contents for RBIV-30

Reviews:

Related manuals for RBIV-30

Brands by name

Popular brands