Zline RBIV-30, Installation Manual And User'S Manual

Page: 11 / 116

6
Gener
al Safet
y
BEFORE INSTALLATION
• Check if the floor where the product will be installed is level. Use a level.
• Installation area must not be subjected to direct sunlight and it must be away
from heat sources, ovens, radiators etc.
• The ambient temperature must be between 55°F (13°C) and 110°F (43°C).
Otherwise, function errors may arise when the product is running.
• If it is not possible to avoid installing the product near a heat source, the minimum
clearances given below must be maintained between the product and the said
source:
• 1 3/16" (3 cm) from electric hobs or ovens
• 12" (30 cm) from gas or fuel operated hobs or ovens
Please observe the following rules:
• The dedicated breaker must be easily accessible in case of an emergency; it must
not be hidden behind the product.
• Plug or cable must not touch the back surface of the product. Otherwise, it may
get damaged due to the vibration of the product.
• Do not connect the plugs of other appliances behind this product.
• If the humidity level is high where the product is used, corrosion may be seen on
the outer surface of the product. Keep the installation room dry and well-cleaned
to avoid corrosion.
To avoid the risk of electric shock:
• Connect the plug to a grounded electrical outlet receptacle.
• Do not remove the ground terminal of the plug.
• Do not use adapters.
• Do not use extension cables.