22
21
Dr
ain Hose Installation
INSTALLATION
STEP 7: INSTALL THE DRAIN HOSE
1. Make sure that the leveling feet are loosened before standing the dishwasher
upright. They may be tight from shipping/packaging.
2. Turn the dishwasher upright.
3. Slide a screw-type hose clamp onto the right-angled end of the drain hose.
4. Install the drain hose to the dishwasher drain outlet on the back of the
dishwasher, then tighten the screw-type hose clamp.
YOU’LL NEED
• Phillips screwdriver
• Screw-type hose clamps
• Drain hose
Level th
e Dishwash
er
INSTALLATION
STEP 8: LEVEL THE DISHWASHER
Important:
The dishwasher must be level for proper dish rack operation
and wash performance.
1. Open the door, then place a level on the door and on the rack track inside the
tub to make sure that the dishwasher is level.
2. Level the dishwasher by adjusting the three leveling legs individually.
Note:
You may need to pull your dishwasher out of the cabinet if major
adjustments to the leveling legs are required.
Tip:
Pull the lower rack out about halfway. Make sure that the rack
does not roll forward or back into the dishwasher. If the rack or rolls in
either direction, you must level the dishwasher again.
