Zline BLISS BLS-SHS, Installation Manual And User'S Manual

Page: 81 / 84

75
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
There is leakage under the
handle. The locking nut has come
loose. Unscrew the lever on
the handle by hand.
Loosen set screw with a
hex wrench. Remove the
handle and unscrew trim
cap by hand. Tighten
locking nut with an
adjustable wrench.
Water will not shut off
completely. Cartridge may be
defective. Unscrew the level on
the handle by hand.
Loosen set screw with a
hex wrench. Remove the
handle and unscrew trim
cap by hand. Unscrew
the locking nut with
an adjustable wrench.
Remove ceramic disc
cartridge. Check for
cracks.
There is a leak between
the spray head and the
hose. The spray head may be
loose or the washer is not
seated correctly in the
hose connection. Tighten the spray head
by hand until snug. Make
sure the washer is seated
correctly.
Troublesh
ooting