6
Electrical Connection
BEFORE INSTALLATION
ELECTRICAL REQUIREMENTS
ELECTRIC SHOCK HAZARD
If codes permit and a separate ground wire is used, it is recommended that a qualified
electrical installer determine the ground path is adequate and wire gauge is in accordance
with local codes. Do not use an extension cord with this appliance; doing so may void
the warranty.
IN U.S.A.
Be sure the electrical connection and wire sizes are adequate and in conformance with the
National Electrical Code ANSI/NPA70-latest edition and all local codes and ordinances.
A hard copy of the above code standards can be obtained from:
National Fire Protection Association
One Batterymarch Park
Quincy, MA 02269
IN CANADA
Be sure the electrical connection and wire size are adequate and in conformance with
Canadian Electrical Code CSA standard C22.1, Part 1-latest edition, and all local codes
and ordinances. A hard copy of the above code standards can be obtained from:
Canadian Standards Association
178 Rexdale Blvd.
Toronto, ON M9W 1R3 CANADA
• The electrical power to the oven branch circuit must be shut off while line connections
are being made.
• A proper electrical ground is required on this appliance. The free end of the green
wire (the ground wire) must be connected to a suitable ground. This wire must remain
grounded to the oven.
• If a cold water pipe is interrupted by plastic, non-metallic gaskets, union connections, or
other insulating materials,
DO NOT
use for grounding.
• DO NOT
ground to a gas pipe.
• DO NOT
have a fuse in the
NEUTRAL
or
GROUNDING
circuit. A fuse in the
NEUTRAL
or
GROUNDING
circuit could result in an electrical shock.